Hollow panels with ridges, so-called cell wall panels may also serve as a finishing material for the design of slopes. Air layer gives some insulating properties, which means that winter will not freeze slopes. A further warming of the house, for example, mineral wool, will completely eliminate the phenomenon of condensation and protect opening your windows from freezing, and such a thing as impartial mold and cracks on the painted surface. Besides, this kind of slope, unlike their counterparts there is a clear advantage in the form of a flexible casing, to hide the attachment of the slope to the wall, as well as the ability to remove the re-installation during the next repair. An additional advantage of cell slopes are their affordable prices that make up the competition even their predecessors, plaster, and the possible installation when you install windows (about two hours on a single window) – this type of slope gives a head start to other kinds of trim windows. The porous plates of foamed PVC have a homogeneous structure and low thermal conductivity. Used for slope plate thickness from 4 to 10 mm. As a rule, the thickness determines the cost of panels, and, therefore, furnish a whole, but in any case, the lack of this type of finishing material: the high cost of the material.
And, of course, a choice of two options for consumers textures – matte and glossy. Attractive appearance, ease of operations make foamed PVC attractive to consumers, but do not forget about its major shortcomings – the softness. Any strike or slam on the surface of the slope could leave her in the literal sense of an indelible mark. Thin Plastic has a flat smooth surface, it is possible to make slopes with their own hands, but that its positive characteristics as a material for finishing the end of slopes. Some companies offer very fast draw the space around the window, stick to the plastic lined with cement-sand mortar slopes.